|
|
||
|
|
||
|
Erie
Branch |
Departments
& Services |
|
| Activated
Carbon Aggregates Asphalt Cement and Concrete Metals - Copper Alloys Soil Testing Water, Waste Water, Water Leachables Ferrous Alloys Aluminum Alloys Nickel Alloys Coal Analysis Oil Analysis Paints Trace Contaminant Testing - Nuclear Related Polymers and Plastics Silicate Chemistry General (Slag, Stone, Shale, Limestone, etc.) |
||
| Activated Carbon | ||
|
ASTM D-5832 |
Volatile Matter Moisture Particle Size Distribution Iodine Number Effective Size Uniformity Coefficient Apparent Density Breakthrough Capacity Total Ash Carbon Tetrachloride |
|
| Aggregates | ||
|
ASTM C-25
Carbonate
Content CaCO3 or MgCO3 Chemically |
||
|
ASTM D-5 |
Penetration 77°F Softening Point Flash Point, Cleveland Open Cup Residue by Distillation Ductility 77°F |
|
| Cement and Concrete | ||
|
ASTM C-150/C-114 |
Type I, II, III, IV,
and V Blaine Fineness (AASHTO T153) Loss on Ignition (per temperature) Acid Solubility Chemical admixture for concrete IR analysis Chloride Ion Content |
|
| Metals - Copper Alloys | ||
| EPA 200.7 Aluminum, Copper, Nickel, Phosphorus, Lead, Sulfur, Antimony, Silicon, Tin, Zinc. | ||
| Soil Testing | ||
|
ASTM
C-471 |
Gypsum Potential Pyritic Sulfur Potential & Iron Soluble Salts Chloride Sulfate pH Resistivety Total Petroleum Hydrocarbons |
|
| Water, Waste Water, Water Leachables | ||
| ASTM
D-2036/SW 846-9010
Cyanide
(Free/Total) ASTM D-3761 Fluoride ASTM D-3867/EPA 352.1 Nitrate and Nitride EPA 120.1 Resistivity/Conductivity EPA 413.1 Oil and Grease SM 203 Langlier Saturation Index SM 314 B/EPA 215.2 Ca and Mg Hardness (EDTA) SM 408 Chlorine Residual SW 846-1110 Corrosivity (NACE) SW 846-9065/EPA 420.1 Phenols ASTM D-1498 Oxidation-Reduction Potential EPA 200.7 Metal in Water, Waste Water 6010B 6010A |
||
| Ferrous Alloys | ||
| Carbon, Manganese, Phosphorus, Sulfur, Silicon, Nickel, Chromium, Molybdenum, Boron, Iron, Tungsten, Cobalt | ||
| Aluminum Alloys | ||
| Copper, Iron, Magnesium, Manganese, Silicon, Titanium, Zinc, Aluminum | ||
| Nickel Alloys | ||
| EPA 200.7 Carbon, Cobalt, Chromium, Iron, Manganese, Molybdenum, Nickel, Phosphorus, Sulfur, Silicon, Vanadium, Tungsten | ||
| Coal Analysis | ||
|
ASTM D-409 |
Hard grove
Grind ability Index Sieve Analysis BTU Per Pound Forms of Sulfur Proximate Analysis Ash Ultimate Analysis |
|
| Oil Analysis | ||
|
ASTM D-93 |
Flash Point Pour Point BTU per Gallon Reid Vapor Pressure Viscosity Neutralization Number Metals Specific Gravity Karl Fischer Water Sulfur (LECO SC432) |
|
| Paints | ||
|
ASTM D-1652 |
Epoxy Content Total Amine IR Fingerprint Identification Volatile Content of Coatings |
|
| Trace Contaminant Testing - Nuclear Related | ||
|
ASTM D-516 |
Sulfate Individual Halides Low Melting Point & Heavy Metals Thermal Insulating Materials for Leachable Chloride, Fluoride, Silicate, and Sodium |
|
| Polymers and Plastics | ||
|
ASTM D-3677 |
Rubber Identification
(IR) Qualitative IR Analysis Analysis of Components (IR) |
|
| Silicate Chemistry General (Slag, Stone, Shale, Limestone, etc.) | ||
| ASTM D-4239
Sulfur in Lime ASTM D-3682M Major & Minor Elements - Complete Silicon Dioxide, Aluminum Oxide, Iron Oxide, Calcium Oxide, Magnesium Oxide, Loss on Ignition, Sulfur Trioxide, Sodium Oxide, Potassium Oxide |
||
|
Modern
Industries, Inc., Corporate Offices | ||
